1. 适合一切需要上胶、封盒的纸盒包装，例如：饼干、食品、药品、纸巾盒等包装纸盒封口；

  2. 人工装好物料放至输送带，机械自动上胶、封口，大小规格可调节；

  3. 机器使用胶量大约是手工封盒胶的1/3，胶水使用量极少；

  4. 整机采用不锈钢和铝合金材料，符合食品级标准；

  5. 底部装有脚轮，轻松移动。

（1）Main features:

  1. It is suitable for all carton packaging that needs to be glued and sealed, such as sealing of biscuits, food, medicine, tissue boxes,   etc.;

  2. Filling by manual.Automatic delivery ,gluing and sealing. The size and specification can be adjusted;

  3. The amount of glue used by the machine is about 1/3 of that of manual sealing box glue, and the amount of glue used is very     small;

  4. The whole machine is made of stainless steel and aluminum alloy, meeting food grade standards;

  5. The bottom is equipped with casters for easy movement;

 (二)使用方法：

  1. 首先接通电源，保证设备的线路安全通畅；

  2. 打开电源开关，机器开始自动加热（设定180℃）；

  3. 根据不同热熔胶来设定封盒机加热温度，待胶完全熔化；

  4. 按下启动键，接通气源；

  5. 打开输送带开关，放置装好产品的纸盒到封盒机导入槽；

  6. 自动输送，封盒机开始自动完成涂胶折盖送出成品。

（2）Usage:

  1. First, switch on the power supply to ensure the equipment's line safety and unobstructed;

  2. open the power switch, the machine began to automatic heating set (180 ℃);

  3. Set the heating temperature of the box sealing machine according to different hot melt adhesive, and wait for complete      melting;

  4. Press the start button to connect the air source;

  5. Open the switch of the conveyor belt, and put the carton packed with products into the import slot of the box sealing machine;

  6. Automatic transmission; the sealing machine starts to automatically complete the gluing and folding cover and send the    finished products.

（三）产品质量保证：

   一．材质采用不锈钢铝材型，精美耐用；全部是AOD精炼炉生产的不锈钢，保证不会出现生锈，褐色现象。

   二．三道关口，保证出厂产品优质耐用；

       （1）安装好，必须经过检验员细心检测。

       （2）检验好，必须经过开机检查。

       （3）出厂前，再次进行打样检查。

（3）Product quality assurance:

  1.The material is made of stainless steel aluminum, fine and durable.All the stainless steel produced by AOD refining furnace is    guaranteed not to rust and brown.

  2.Three passes pass, guarantee factory product absolute high quality durable;

     (1) after installation, it must be carefully tested by the inspector.

     (2) the inspection is good, and it must be started up.

     (3) conduct sample making inspection again before delivery

（四）参数Parameters：